PAINT CORRECTION in OCALA

Initial Assessment:

• We begin with a thorough inspection of your vehicle’s paint to identify imperfections such as scratches, swirl marks, and oxidation. This helps us determine the level of correction needed.

Washing and Decontamination:

• After whole exterior detailing process, the vehicle is carefully washed to remove dirt, dust, and grime.

• Iron Decontamination: A specialized iron fallout remover is applied to dissolve and remove embedded iron particles that can cause rust spots and further damage the paint.

• Clay Bar Treatment: A clay bar is used to remove any remaining embedded contaminants from the paint surface, leaving it smooth and ready for correction.

Paint Thickness Measurement:

• Using specialized tools, we measure the paint thickness to ensure there’s enough clear coat for the correction process.

Masking:

• Delicate areas such as trim, rubber seals, and badges are masked off to prevent any damage during the correction process.

One-Step Paint Correction:

• First Step (Polishing): A single-stage polish is used to remove light to moderate imperfections. This stage involves using a polish that contains both cutting and finishing properties, which helps in smoothing out the surface.

• Effectiveness: This method typically removes around 50-70% of surface scratches, swirl marks, and other minor imperfections. It significantly enhances gloss and overall appearance, making it ideal for vehicles with less severe defects or for those looking for a quicker enhancement.

Two-Step Paint Correction (Optional):

• First Step (Cutting): A cutting compound is applied using a machine polisher to remove deeper scratches and defects. This abrasive compound cuts through the top layer of the clear coat to level out the imperfections.

• Second Step (Polishing): A finer polish is used to refine the paint surface, bringing out a smooth and radiant finish. This stage removes any micro-marring left by the cutting compound.

• Effectiveness: The two-step correction process is more intensive and can remove up to 80-95% of scratches, swirl marks, and other defects, resulting in a near-perfect finish. It’s suitable for vehicles with more severe paint issues or for those seeking the highest level of correction.

Inspection:

• After each correction stage, the paint is inspected under various lighting conditions to ensure imperfections are effectively removed.

Wax and Ceramic Sealant (Optional): For additional protection and enhanced shine, we offer a wax or ceramic sealant application. This step provides a layer of defense against environmental contaminants and UV rays, keeping your vehicle looking immaculate for 3 to 12 months. For more information click on; wash and wax.

Ceramic Coating Application (Optional):

• Once the paint correction is complete, an optional ceramic coating can be applied.

• The ceramic coating is meticulously applied to provide a durable protective layer that enhances gloss, adds hydrophobic properties, and shields against environmental contaminants.

• For more information click on; ceramic coating.

Final Inspection and Detailing:

• A final inspection is conducted to ensure all areas have been addressed and the vehicle meets our high-quality standards.

• Any remaining residue is removed, and the vehicle is given a final wipe-down.

Optional Add-Ons: For more information clink on; interior detailing, engine detailing, headlight restoration.